Description
Unlock your 170″ & Extended Wheel Base High Roof Sprinter van’s storage potential with this highly versatile, rugged roof rack kit for Mercedes Benz Sprinter vans.
This rugged, low-profile roof rack kit maximizes storage potential on Mercedes Benz Sprinter vans. The versatile slat system securely accommodates heavy loads like ladders and pipes, as well as roof-mounted accessories like air conditioners and skylights. With its expansive, configurable load area, the rack carries gear for long trips or weekend getaways while supporting a wide range of Front Runner accessories.
Looking for a kit for a 144 Inch Wheel base Sprinter? Click Here
Configure your Slimpro Van Rack to suit any adventure by adding the RACK ACCESSORIES or explore them later when a new adventure calls.
- Compatible with Mercedes Benz Sprinter L2/H2 / 170″MWB High roof vans with a vehicle length of 5923mm / 233.2″.
- Load-carrying area: 3176mm (125″) L x 1352mmW (53.2″).
- Twelve (12) Mounting Feet secure into van’s existing factory mounting points.
- Included Slat Bracket can be inverted for a lower profile at 85mm (3.4″) height, or left in standard configuration at 127mm (5″).
- Compatible with most Front Runner accessories.
- Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
- Fitment guide and all mounting hardware are included. No drilling or modification required.
- All Front Runner racks are backed by a limited lifetime warranty.*
Consisting of:
6x FAVF004 – Mercedes Sprinter Van Rack Foot Set
1x RRAC207 – Van Rack Joiner Kit
2x RRAC208 – Van Rack Side Profile End Caps
3x RRAC907 – Stud Plate MB Sprinter Track
4x RRNS1255 – Narrow Slat / 1255mm (Pair)
2x SPVT003 – Van Rack Side Profile / 1560mm
1x WDST013 – Wind Deflector Van Rack 30mm Lip
Material Used:
Black epoxy powder – coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
3176mm (125″)L x 1352mm (53.2″)W x 143mm (5.6″)H
Approximate Installed Weight:Â 34.02kg (75lbs)
Mercedes Benz Sprinter Van Rack Kits heights are 90mm (Z bracket inverted) to 140mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat.
The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:
Width: 440mm (17″)
Length: 1730mm (68″)
Height: 160mm (6″)
Shipping Weight:
Weight: 38kg (84lbs)
